Sai - Weld India
Borivali East, Mumbai, Maharashtra
GST No. 27AAWPW8940R1Z3
TrustSEAL Verified
Call 0804898053678% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Sensor | Standard |
| Model Name/Number | Standard |
| Usage/Application | controlling The movement of Torch |
| Type | Automatic |
| Digit Display Size | Single Display |
| Usage | In Plasma Cutting CNC Machines |
| Cost-saving height control unit for simple plasma cutting applications. The KHC4-ARCsystem provides all the essential functions that are needed for good cuts and optimum mutil sation of the work-piece | |
| Sr No. | Features & benefits |
| 1 | For all torches of the Cut Fire-, PB-A-, Hi Focus- and Fine Focus series• |
| 2 | Installation or retrofit possible on any guiding system for modernization of existing cutting workstations |
| 3 | Lifting up to 220 mm and working load up to 12 kg |
| 4 | Integrated 3-dimensional collision protection |
| 5 | Cost-saving alternative to the KHC4-PCSFeatures |
| 6 | Easy installation on all common profile cutting machines |
| 7 | Precise finding of initial position by smooth tactile work-piece touching |
| 8 | Exact height correction due to height adjustment in millimetres |
| 9 | Cutting height mode“ |
| 10 | High work-piece utilization by precise measuring the height close to kerfsand edges |
| 11 | Automatic kerf and edge detection |
| 12 | Additional height increase during piercing increases the lifetime of the nozzles |
| 13 | Vertical and 3D collision protection – deflection in all directions possible |
| 14 | Collision protection with integrated protection against overload |
| 15 | Integrated process and engine control |
| 16 | High lifting speed of 80 mm/s, |
| 17 | Controls for dynamic at linear drive (control response time and control delay time) |
| 18 | Corner function (control is turned off during cutting of corners) |
| 19 | Isolated arc voltage input 0 to -300 V0 to 10 V also possible with appropriate internal connection |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Input Sensor | Standard |
| Model Name/Number | Standard |
| Power | 24VDC/5A(+- 10%) |
| Application | CNC controller |
| Voltage Control Accuracy | +/- 1V |
| Maximum Speed | 6000 mm/min (240 IPM) 1200 rpm |
| Arc Voltage Range | 50-300V |
| Product Details: | |
| Maximum Speed | 6000 mm/min (240 IPM) @ 1200 rpm |
| Voltage Control Accuracy | ± 1V |
| Arc Voltage Range | 50-300V |
| External Power Supply Requirement | 24VDC/5A (±10%) |
| Size | 400 mm W x 70 mm H x 290 mm D |
| Weight | 3 kg |
| Warranty | 1 year |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | controlling the movement of torch |
| Model Name/Number | Standard |
| Operation Mode | Automatic |
| Brand | hypertherm |
| IP Rating | IP40 |
| Color | Black & red |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | controlling The movement of Torch |
| Operation Mode | Automatic |
| Digit Display Size | Single Display |
| Brand | Hypertherm |
| Color | pink |
| Overview | ||
| The Sensor THC is a full featured torch height control system specifically designed to integrate with Hypertherm Automation’s shape cutting controls. | ||
| The Sensor THC incorporates the latest advancements in system integration and hardware reliability. With integrated Soft Motion and closed loop servo control, the Sensor THC simply outperforms the competition. | ||
| The result is an easy to use height control that can significantly increase the productivity and profitability of your shape cutting operation. | ||
| Features | ||
| Complete built-in test for easy hook-up, system test, and configuration. | ||
| Built in user programmable process control parameters for initial height sense, plasma arc volts, torch height Disable, automatic kerf crossing detection, skip IHS, and IHS offset | ||
| Automatic retry on arc transfer error | ||
| Complete servo loop adjustments including proportional, integral, derivative, and feed-forward gains | ||
| Arc voltage range 50-300 VDC in 0.5 volt increments | ||
| Initial height sense can be done with ohmic contact or position error stall detection | ||
| Manual or full automatic height control | ||
| Auto Arc Voltage Set | ||
| Preflow during IHS. | ||
| Support for arc style marking torches | ||
| Hardware specifications | ||
| 100-watt Yaskawa AC Servo drive and motor rated at 0.9 amp continuous, 2.8 amp peak, 3000 RPM | ||
| 12 bit analog to digital converter sampled at 1Khz interrupt rate Industrial grade low profile slide using dual bearings with wipers and integrated electrical brake. Maximum load weight 30 Lbs. (13.6 kg) optically isolated ±10VDC drive output and incremental encoder input 12.0” full stroke travel for torch positioning | ||
| Slide dimensions: 25.75" H (654mm); 5.0" W (127mm); 3.0" D (76 mm) | ||
| Slide weight: 17lbs (7.7 kg) | ||
| Electronics operating environment: 0 to 50°C (32 to 122"F); 95% relative humidity (non-condensing) | ||
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | controlling The movement of Torch |
| Brand | Hypertherm |
| Type | Automatic |
| Color | Black & Grey |
| Display | single |
Hypertherm’s Sensor™ plasma torch height control (PHC) is an easy-to-use, highly reliable voltage-sensing height control for conventional plasma piercing and cutting applications. Requiring no operator input while cutting, the controller offers separate settings for both pierce and cut heights to automatically position the torch.
The Sensor PHC is compatible with any computer numeric control (CNC) and a broad range of plasma systems, and is easy to install on new or existing conventional plasma cutting tables. The Sensor PHC delivers improved performance at a significantly lower cost than other height control solutions.
Product Details:
| Minimum Order Quantity | 1 Piece |
| Color | Black |
| Type | Automatic |
| Operation Mode | Automatic |
| Digit Display Size | Single Display |
| Brand | HYD |
| Usage/Application | CNC Machine Controller |
| Control Mode | automatic |
| Sr. No | Features |
| 1 | 10.4 inches 800*600 dots color LCD. |
| 2 | Man-Machine-Dialog software and Professional Hot Key design for easy cutting operation, user-friendly as Hypertherm’s EDGE controller. |
| 3 | Multi-language file system and menu, and the menu can be switched only by one key. |
| 4 | DSP core can control the machine move in high speed accurately, stably and in low noise. |
| 5 | Long-distance remote control can control the machine to move forward ,backward, left, right and cutting start, stop and so on (optional configuration). |
| 6 | Support the EIA code (G code) and various FastCAM???FreeNest???SmartNest???IBE softwares. |
| 7 | Compact keyboard design and easy to input files. |
| 8 | Operations such as Proportion Zoom, Rotate, Mirror, Array display, Steel plate angle adjust…..all available and have professional solution in the CNC controller. |
| 9 | Coordinate system can be customized to support the two-dimensional coordinates of all eight kinds. |
| 10 | All input and output port type and the number can be customized (normally open or normally closed) |
| 11 | System Self-diagnosis for easy trouble-shooting. |
| 12 | All functions and techniques can upgrade online |
| 13 | Import and export files by single or all files. |
| 14 | Support the Flame, Plasma, Dusting draw and Demonstration four kinds of mode. |
| 15 | Flame and Plasma are separated in the control IO ports. |
| 16 | Support THC, two level preheat, three level pierce in flame mode. |
| 17 | Plasma arc feedback, positioning feedback, automatically shut down the arc at the corner. |
| 18 | Support edge cutting. It can save the preheat time for the thick steel plate. |
| 19 | Movement speed can be real-time acceleration, deceleration. |
| 20 | According to plate thickness, the cutting speed is automatically restricted by a speed limit in the corner, effectively preventing over burn. |
| 21 | Dynamic/static illustration of the process, graphics zoom in / out, dynamically tracking cut-off point under zooming state. |
| 22 | Automatically memorize the working situation and the last cutting point when power off. |
| 23 | "Cutting offset" function can avoid waste the steel plate when the nesting of the plate is calculated wrong. |
| 24 | Set up different administration authority and the corresponding password to safeguard the interests of managers. |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | controlling the movement of torch |
| Brand | hypertherm |
| Operation Mode | Automatic |
| Color | Black |
| Language | Multi |
| CNC | CNC Plasma Cutting Controller |
| The MicroEDGE Pro CNC brings Hypertherm’s latest hardware and Phoenix software technology to a product that is customizable for a wide variety of applications. Designed for reliability and ease of use, the MicroEDGE Pro improves cut quality, productivity and profitability by delivering Hypertherm’s cutting process expertise directly to your factory. It is as if you have your best operator on every shift. | |
| The MicroEDGE Pro CNC is the most versatile CNC offering from Hypertherm. The MicroEDGE Pro control package provides a unique combination of configurations, expandable features, and common software with the other Hypertherm CNCs. Available in both analog and SERCOS versions, this scalable CNC offers the OEM the ability to standardize on a control solution without compromising application range. | |
| Specifications | |
| Application Software | Phoenix shape cutting control software |
| Operating system | Windows® XPe |
| Display and keyboard | Customer supplied - touchscreen and standard LCD supported |
| Communication ports | Ethernet LAN, Hypernet, USB and RS-232/422/485 isolated serial |
| Dimensions | 239 mm (9.4") high x 465 mm (18.3") wide x 335 mm (13.2") deep |
| Temperature range | -10° C to 40° C ambient (14° F to 104° F ambient) |
| Warranty | Two -year warranty |
| Regulatory compliance | CE, CSA, GOST-R |
| Operating voltage and frequency | 100 – 240 V, 50/60 Hz |
| Software utilities | Part Program Support (PPS), Remote Help, networking, Autogas support, DXF import, and simple shape nesting |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Automatic |
| Usage/Application | controlling The movement of Torch |
| Control Type | High Limit |
| Brand | adtech |
| Color | Black & Grey |
| Operation Mode | Automatic |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Automatic |
| Brand | ADT- HC |
| Digit Display Size | Single Display |
| Color | Black & Grey |
| Operation Mode | Automatic |
| Display | single |
| Display Size | 10.4 |
| ADT-HC6500 is 10.4 inch display screen CNC Flame/Plasma controller, strongly anti-interference, which can control 2 sets or more of Hyperthern plasma sources without any interference. This Plasma CNC controller passed CE and IS9001 certificates. It can be applied in high precision bench/gantry type plasma / flame cutting machine. | |
| Sr. No. | Feature |
| 1 | ARM9 industrial Processor, embedded system of highly cost performance; |
| 2 | 10.4 Inch industrial Colorful LCD display; |
| 3 | 2(support 3 pulse port output--dualdrive) Axis step/servo motor control; |
| 4 | Multi-language compile; |
| 5 | Support Wireless MPG; |
| 6 | Support capacitive/lilasma torch height controller; |
| 7 | Support Multi-gun running simultaneously, and Axis dual drive; |
| 8 | Single program can store 50000 lines of instructions and processing code; |
| 9 | Software & hardware Alarm function, user friendly & safety operation; |
| 10 | Customized software by user’s request; |
| 11 | One-key storage & restore function. |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Thermal Dynamic |
| Color | Green & Black |
| Operation Mode | Automatic |
| Display Unit | single |
| Display Size (inch) | 15" |
| Digital | CNC Controller |
| Sr No. | Integrated plasma systems have revolutionized the high-end, high-capacity, automated plasma cutting industry. Today Thermal Dynamics’ iCNC Performance makes it possible to build low-cost machines with high-end, professional performance that until now have been unavailable. It's a true industry Game Changer. | |
| 1 | HyPerformance, Low Cost CNC | |
| 2 | Thin panel mount unit 409 mm x 492 mm x 73 mm (W16.1" x H19.4" x D2.9") | |
| 3 | 15" Touch Screen | |
| 4 | Operator panel for plasma, oxy-fuel & auxiliary functions | |
| 5 | Built-in WiFi | |
| 6 | 3-axis drive outputs (both analog & step/direction) | |
| 7 | 3 encoder inputs | |
| 8 | Programmable I/O (16 IN / 20 OUT, active low) | |
| 9 | Power input 24 VDC | |
| 10 | Optional integrated plasma height control | |
| 11 | Optional servo motors with built-in amplifiers | |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | cutting |
| Brand | Thermal Dynamic |
| Voltage | 24 V DC |
| Operation Mode | Automatic |
| Color | Green |
| Display | Single |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | controller |
| Type | Automatic |
| Digit Display Size | Single Display |
| Operation Mode | Automatic |
| Color | Yellow & Black |
| Warranty | 1 year |
| Sr. No | Features | ||
| 1 | PTHC-200DC is our new stand alone THC in 2013, comparing to old XPTHCs, it has new features as follow, | ||
| 2 | Support Torch retaining cap IHS or Nozzle Contact (ohmic contact) IHS with any HF plasma…..Great anti-interference improvement. | ||
| 3 | PTHC has much higher accuracy than old XPTHCs, standard accuracy is 1V, enough to support HD plasmas. max support 12000mm/min cutting speed. | ||
| 4 | Support Dynamic pierce, collision output to CNC. | ||
| Sr. No | Key Features | ||
| 1 | Auto Initial Height Sensing(IHS) | ||
| 2 | Torch Retaining Cap IHS( ohmic contact) and Proximity Switch IHS both available, Proximity Switch IHS is for cutting dirty/rusty workpiece, needing the Anti-Collision Fixture designed by HYD (breakaway kit ). It supports underwater cutting,too. | ||
| 3 | Anti-Collision Function | ||
| 4 | When torch tip touches work piece, THC automatically lift torch up to IHS height to avoid crashing. It is effective both on Manual/Auto mode. | ||
| 5 | Freeze Auto Height Control on Corner Signal | ||
| 6 | XPTHC-300 would freeze Auto Mode on receiving corner signal from CNC system to avoid torch diving on Cycle start/end, corner turning. | ||
| 7 | Support DC/AC24V power supply both | ||
| 8 | Dual speed during IHS, better torch tip protection, and 6 indicators to easy trouble-shooting. When it get problem, we can easily find the problem by the indicator's on/off state and make fast solution to customer. | ||
| 9 | THC sensitivity, torch retract height after cutting....many functions adjustable to user | ||